Men’s and Women’s Boombah Footwear Sizing

This is a sizing guide, not a fit guarantee.
If you are new to Boombah footwear we have provided a sizing guide below to help with your selection. Please note that all of our men’s shoes are a standard D width and Women's are a standard B width. If you fall outside those widths, you should adjust your shoe selection accordingly.

If you already know your size in athletic shoes, we recommend staying with that size when purchasing Boombah shoes. Our shoe size chart follows standard sizing, and should reflect your normal fit, but check the sizing chart and print out the sizing guide for more information.
If you have ordered from us in the past and have found the size that you prefer, we recommend that you stay with that size.

How to measure: Recommended method

If you don’t know your shoe size, here is how you can measure to find out.

Download Our Printable Measuring Tool

Printing Instructions:
For an accurate size it is extremely important that the measuring tool is printed out at 100% scale.

Click on the link above
Print this page on 8.5” x 11” paper
Select custom scale 100% and make sure that “fit to page”, “actual size”, or “shrink oversized pages” is not selected.
Check the print accuracy using the two scales on the page.

Measuring Instructions:

1. Use a credit card or a ruler to check the print accuracy and scale.

2. Tape both pieces of paper edge to edge, fold the bottom sheet of paper at the dashed line, and place flat against the wall.

3. Step onto the chart with your heel on the “HEEL GOES HERE” line.

Sizing Chart mark where the longest toe ends

4. If available, have someone mark where the longest toe ends. If not, look straight down over the longest toe and read your shoe size.

5. Repeat this process for you other foot. Take the largerof the two measurements, and that is your Boombah shoe size.

Heel-Toe Measurement Method

We recommend only using this method if you do not have a printer for method one.

Measuring Instructions:

1. Place a piece of paper on the floor with one end flat against the wall. Stand on the piece of the paper with your heel touching the wall.

2. Tip: it is easier if someone helps you with this step. Mark the end of your longest toe with a pencil. Keeping the pencil as vertical as possible. Repeat this step with your other foot.

3. Measure your marking from the wall (heel) to the toe of both feet. Take the longest of the two measurements, and compare to our sizing chart below to get your shoe size.

Sizing Tips

If you already know your athletic shoe size, we recommend staying with that size when purchasing Boombah shoes. Our shoes have been engineered to be consistent with the market.
This chart will measure accurately for your shoe size, but for a looser fit consider going up to the next half size.
Are you between sizes? Choose the larger size. You can adjust your fit with different socks, insoles, and lacing patterns.
For the most accurate fit, we recommend measuring your feet at the end of the day while wearing the same type of socks you would wear with the shoe you plan to purchase.
Remember to measure both feet and choose the larger size. Your feet can differ in length by as much as a full size.

Sizing Chart

If you already know your shoe size or heel-toe measurement, refer to the chart below to know which size to order.

Footwear Sizing Chart

Heel-Toe Measurement (CM)	Men’s/Youth	Women's	EU	UK
19.2	1	2.5	32	13.5
19.6	1.5	3	33	1
20.3	2	3.5	33.5	1.5
20.8	2.5	4	34	2
21.2	3	4.5	35	2.5
21.6	3.5	5	35.5	3
22	4	5.5	36	3.5
22.4	4.5	6	37	4
22.9	5	6.5	37.5	4.5
23.3	5.5	7	38	5
23.7	6	7.5	38.5	5.5
24.1	6.5	8	39.5	6
24.5	7	8.5	40	6.5
25	7.5	9	40.5	7
25.4	8	9.5	41.5	7.5
25.8	8.5	10	42	8
26.2	9	10.5	42.5	8.5
26.7	9.5	11	43	9
27.1	10	11.5	44	9.5
27.5	10.5	12	44.5	10
27.9	11	12.5	45	10.5
28.3	11.5	13	45.5	11
28.8	12	13.5	46.5	11.5
29.2	12.5	14	47	12
29.6	13	14.5	47.5	12.5
30	13.5	15	48	13
30.5	14	15.5	49	13.5